How To Lay Concrete

Laying concrete is a relatively easy DIY task to achieve and it also requires no special tools to get started. Within this article, we walk you through the entire process of how to lay concrete along with photos of each of the steps involved.

Tweet Pin It
how to lay concrete
Darimo is reader-supported and we may earn an affiliate commission if you buy through links on our site. Find out more.

After making your perfect concrete mix, you’ll want to lay it before it becomes dry and brittle. However, rather than simply pouring it where it needs to be, it’s important that you take your time to prepare the ground. After pouring the concrete onto the ground, you’ll then need to level it off and eliminate any air pockets as discussed in the tutorial below.

What You’ll Need

  • Concrete
  • Trowel/shovel
  • Durable gloves
  • Damp proof membrane (optional)
  • Straight-edged timber

How To Lay Concrete


1. Prepare The Ground

Before you lay any concrete, it’s crucial that the ground has been prepared beforehand. This will involve removing any debris and also putting down a damp proof membrane in order to prevent rising damp.

In terms of which damp proof membrane to use on a concrete floor, it’s recommended that its made from a durable polyethylene which will be available in many different gauges.

Another aspect to consider when preparing the ground is where you want the concrete to be laid. For example, you may wish to section off certain areas of the ground using some timber because this will allow you to achieve straight edges. Once the concrete has set (24 to 48 hours), you’ll then be able to remove the timber used to create the edges.

2. Pour The Concrete

When it comes to pouring the concrete onto the ground, you’ll want to try and distribute it evenly as you pour it because this will avoid the effort of moving it around on the floor. It’s also crucial that you use the concrete as soon as possible after mixing it up because if not, it’ll go dry and become unusable.

If you were unable to distribute the concrete evenly, you’ll need to push it across. Depending upon how large the area is, you may be able to use a straight-edged piece of timber or trowel to move the concrete to where it needs to be but if not, you can use a shovel. Whilst moving the concrete, ensure that you don’t dig too deep because you may run the risk of piercing the damp proof membrane.

how to lay damp proof membrane concrete floor

3. Eliminate Air Pockets

After laying the concrete, you’ll then need to eliminate any air pockets because trapped air can be problematic once it has dried. In order to get rid of any trapped air, you’ll need to tamp down the wet concrete using a straight-edged piece of timber. Below is a video that we posted onto our Instagram page that shows us doing exactly that upon a small area of concrete.

View this post on Instagram

 

A post shared by Darimo UK (@darimouk)

4. Make It Level

Once you are happy that all the trapped air has been removed, you can then proceed to making the concrete level. This can be achieved by using the same piece of timber and running it across the surface as shown in the images below.

In this particular DIY project, we laid a self levelling compound on top of the concrete and this meant that it didn’t have to be perfect. However, we still ensured that it was as flat as it could be using the straight-edged timber.

how to lay a concrete floor
how to lay concrete base

5. Allow The Concrete To Dry

After you’ve laid the concrete, it’s crucial that you give it enough time to cure and this can take anywhere from 24 to 48 hours. However, for the concrete to be at its strongest, it can take up to a week. Therefore, if you plan to do any additional work on top of the concrete, we would recommend waiting at least a week for complete peace of mind.

Conclusion

As you can see from the above guide on how to lay concrete, it really isn’t that difficult and it also doesn’t require any special tools. The hardest part of the whole process is usually making the concrete in the first place. However, if you want to skip that stage, you can use a “ready to use” product that only requires water and mixing together.

To ensure that your concrete project is a success, we would highly recommend asking someone for a helping hand. This is because once the concrete has been made, it’s a race against the clock to get it laid before it dries out.

The Author Who Worked On This Article

author dan darimo

Dan Morgan

As a keen DIY’er, gardener and somebody that loves the latest tech, Dan is someone that brings years of experience in multiple trades. Since buying his first house, he has been obsessed with renovating properties and filling it with the latest products. This has led him down the road of testing hundreds of products and creating in-depth “how-to” and informative guides that offer his first-hand experience. Other interests include working on cars, keeping fit through sports or his home gym, caravanning and drinking great coffee.

If you would like to read more about Darimo and the authors, you can visit our about page. This goes into great detail regarding how we test products, create our guides and everything else.

Follow #DarimoUK

Copyright © 2022. All rights reserved.